PVC Insulated Winding Wires - Exporter & Manufacturer, Mehsana, India

To inquire, Select Product/s & Click on

Product Code : 04

[Select]

Product Specification

PVC Insulated Winding Wires

Manufactured at the modern, well-equipped plant, Vimal winding wires are insulated with a very superior grade of HR PVC compound formulated and manufactured in house, to give to the necessary electrical strength and resistance to abrasion.

The copper conductor of required purity and conductivity is dawn and in line annealed in world-class wire drawing machine. The automatic on-line controls in our extrusion process consistently give high quality to Vimal Winding Wires.

Table 1 :- HR PVC Insulated winding wires as per IS : 8783 (Part 4/ sec1) : 1995 (Soild Copper Conductor)
Nom. Conductor Diameter (mm.)	Nom. Cross-Sectional Area (sq. mm.)	Min. Insulation Thickness (mm.)	Approx Overall Diameter (mm.)	Max. Conductor Resistance at 20⁰C (Ohms / Km)
0.80	0.502	0.30	1.47	3.500
0.90	0.638	0.30	1.57	2760
1.00	0.785	0.30	1.67	2.240
1.10	0.850	0.30	1.77	1.850
1.20	1.13	0.30	1.87	1.550
1.30	1.33	0.30	1.97	1.320
1.40	1.54	0.35	2.17	1.140
1.50	1.77	0.35	2.27	9.95
1.60	2.01	0.35	2.37	8.75
1.70	2.27	0.35	2.47	7.75
1.80	2.54	0.35	2.62	6.91
1.90	2.84	0.35	2.72	6.20
2.00	3.14	0.45	3.02	5.60
2.10	3.46	0.45	3.12	5.08
2.20	3.80	0.45	3.22	4.63
2.30	4.15	0.45	3.32	4.23
2.40	4.52	0.50	3.52	3.89
2.50	4.91	0.50	3.62	3.58
2.60	5.31	0.50	3.72	3.31
2.70	5.73	0.50	3.82	3.07
2.80	6.19	0.55	4.02	2.86
3.00	7.07	0.55	422	249

Physical Properties

The Limiting Values of solid copper conductor diameter, Elongation at Break and other technical details are as given in IS 8783 (Part 1): 1995

The Properties of PVC compound are as given in IS 8783 (Part 2): 1995.

The Winding Wires are tested as per IS 8783 (Part 3):1995

Instruction for Use

As this product is being delicate & it's application being critical, A due care should be taken in handling of winding wire from manufacturing of coils to packing of pump.
These wire are strictly passes through 'High voltage test' with latest computerised equipment in Vimal factory to avoid any critical problem while using. So customer does not required to carry out any test (except Meager Test) in all respects.
Do not stack more that 4 coils otherwise, bottom coil is likely to get damaged due to upper coil weight.
Always keep away winding wire from those things having sharp edges to avoid unintentional damage. Also avoid welding spark falling on winding wire while welding.
It is sure that if a care has been taken during the use of winding wire, store time & inserting into stator slot it will be definately ensure your Submersible pump's performance & Trouble free shooting for long long time.
To ensure proper jointing with three core flat cable with motor to avoided failure.

<< Back